Waste from Tanneries – An Overview

A worker doing finish grading on sides of leat...

“Tanning” refers to the process by which collagen fibers in a hide react with a chemical agent (tannin, alum or other chemicals). However, the term leather tanning also commonly refers to the entire leather-making process. Hides and skins have the ability to absorb tannic acid and other chemical substances that prevent them from decaying, make them resistant to wetting, and keep them supple and durable. The flesh side of the hide or skin is much thicker and softer. The three types of hides and skins most often used in leather manufacture are from cattle, sheep, and pigs.

A large amount of waste produced by these tanneries is discharged in natural water bodies directly or indirectly through two open drains without any treatment. The water in the low lying areas in developing countries, like India and Bangladesh, is polluted in such a degree that it has become unsuitable for public uses. In summer when the rate of decomposition of the waste is higher, serious air pollution is caused in residential areas by producing intolerable obnoxious odours.

Solids originate from all stages of leather making; they comprise fine leather particles, residues from various chemical discharges and reagents from different waste liquors. These comprise of large pieces of leather cuttings, trimmings and gross shavings, fleshing residues, solid hair debris and remnants of paper bags.

Out of 1000 kg of raw hide, nearly 850 kg is generated as solid wastes in leather processing. Only 150 Kg of the raw material is converted in to leather. Tannery generated huge amount of waste as follows:

  • Fleshing: 56-60%
  • Chrome shaving, chrome splits and buffing dust: 35-40%
  • Skin trimming: 5-7%
  • Hair: 2-5%

Over 80 per cent of the organic pollution load in BOD terms emanates from the beamhouse (pre-tanning); much of this comes from degraded hide/skin and hair matter. During the tanning process at least 300 kg of chemicals (lime, salt etc.) are added per ton of hides. Excess of non-used salts will appear in the wastewater. Because of the changing pH, these compounds can precipitate and contribute to the amount of solid waste or suspended solids. Every tanning process step, with the exception of finishing operations, produces wastewater. An average of 35 m3 is produced per ton of raw hide. The wastewater is made up of high concentration of salts, chromium, ammonia, dye and solvent chemicals etc.

Enhanced by Zemanta
Advertisements

2 thoughts on “Waste from Tanneries – An Overview

  1. ASM.
    How are you doing?
    The central ETP of our new upcoming Tannery estate is moving forward & it would be interesting to find out how the sludge can b used to generate electricity.?We would be glad for you to participate with us from this point in this activity.
    It would b a pleasure to hear from you !
    Thanks & regards
    Shahed

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s